Taizhou Huangyan Yongmao Mould Co., Ltd.
Main products:Mould,Pipe Fitting Mould
Contact Us
  • Contact Person : Ms. Lu Judy
  • Company Name : Taizhou Huangyan Yongmao Mould Co., Ltd.
  • Tel : 86-576-84025855
  • Fax : 86-576-84025857
  • Address : Zhejiang,Taizhou,Xinqian Industrial Park, Huangyan,
  • Country/Region : China
  • Zip : 318020

PPR mould

PPR mould
Product Detailed
Related Categories:Moulds
Related Product Searches:PPR mould,High Quality,PPR mould, taizhou mould
Moulds for drinking water supply systems,including coupler, elbow, tee,cross, reducer, female/male thread elbow, valve so on.

Yongmao is the one of the leading pipe fitting moulds in China.We supply the fittiing size up to 630mm


General Design

1.1 The mold(s) should always have interlocks for both cavities and cores.

1.2 The mold(s) shall be generally provided with venting facilities. These venting facilities shall be provided at the end of the flow way and near to flow lines.

1.3 The mold(s) should be equipped with feed for its handing. When it is not possible to put feet, use a stand for supporting the mold and storage.

1.4 The eyebolt thread in the mold(s) should be made in such a manner that the suspension remains in balance (Equidistant from the center of mass)

1.5 In the base plates (Upper and Lower) there should be four holes with threads with the same dimensions as the eyebolt.

1.6 Make undercuts in the corners between the plates to make easy the disassembly of the mold, between all the plates (lift-off corners)

1.7 Incorporate lubricating sliding plates

Type of fittingMould for PPR pipe fitting
Description of goods (mold name)Coupler, Elbow, Tee, Reducer....
No.of cavitiesMulti- cavities
Steel for Mold baseStandardization DIN 1.1730
Steel for Core,cavityWerkstoff - DIN1.2738 with Nitraded treatment
Mold componentsHASCO/DME Standard spare parts
Core pulling systemHydraulic cylinder
Mould life1,000,000 shots
Runner typeCold runner, tunnel gate or hot runner
Fitting standardISO EN 15874
Working mode Automatic mode, sprue separated from product during ejection

PPR mould

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.